Trying to use QPST to enable tethering... stuck on one step:

So I'm following the directions here:

http://www.sprintusers.com/forum/showpost.php?p=1852347&postcount=37


Here's the step I'm stuck on:

5) Change NAI Option

    a) go to ‘Start Clients’ and select ‘SERVICE PROGRAMMING’
    b) click read from phone
    c) enter the MSL# (What you found in part 3) and hit ok
    d) CLICK SAVE TO FILE

        i) This is a backup procedure to make sure you can fix anything you break!
        ii) Save with name and location that you will remember

    e) Click on M. IP tab
    f) Expand the "NAI" and "Tethered NAI" columns so you can read them both clearly.

        i) You should see that Tethered NAI is not the same as NAI.

    g) Edit Tethered NAI so that it matches.
    h) Save to DIFFERENT back up file

        i) Write to phone



The problem is my version of QPST (2.7) does not have that tab. The only tap that even mentions tethered NAI is the PPP tab.. and it doesn't have anything to do with that I can tell.

Says something about a 20 minute suspension if there is too many bad requests...

thing is the network connection requires no username or password... just dialing #777

The mobile web still works so I know I'm not on data suspension.

Any ideas?